|
|
| |
Description:
PU-W4111 Finishing Oil is a water solutble
100% active oil compound.
Characteristics:
- Primarily used
in producing "pull-up" leathers.
- Produces a
rich, dark, even grain that enhances "pull-up".
- Tends to
promote adhesion of subsequent finish
coats.
- Excellent oil
to use when solvent use may be
problematic.
|
Recommended
Usage:
PU-W4111 finishing
oil can be applied by roller coater, flow
coater, or
by seasoning machine.
Typical Properties:
- Appearance: Amber Liquid
- Solids: 100% ( +/-1%)
- LBS/GAL: 7.8
- Flash Point: NA
- Viscosity: 150 cps max
- pH: NA
|
| This information is believed to be accurate but
is not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
 |
|
| |
| |
Description:
PU-W4183 Finishing Oil is a concentrated oil
compound.
Characteristics:
- Primarily used
in producing "pull-up" leathers.
- Produces a
rich, dark, even grain that enhances "pull-up".
- Tends to
promote adhesion of subsequent finish
coats.
- Excellent oil
to use when solvent use may be
problematic.
|
Recommended
Usage:
PU-W4183 finishing
oil can be applied by roller coater, flow
coater, or by seasoning machine.
Typical Properties:
- Appearance: Amber Liquid
- Solids: 80% ( +/-1%)
- LBS/GAL: 7.8
- Flash Point: NA
- Viscosity: 150 cps max
- pH: NA
|
| This information is believed to be accurate but
is not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
PUC-1250 wax is a specially designed wax
compound used for achieving the "crunch"
look on various types of leather.
Characteristics:
- When applied
properly on leather, it will result in a
moderate to extreme "pull-up" contrast.
|
Recommended
Usage:
Typical
application as follows:
● Spray a very wet coat of the PUC-1250 Wax
diluted by 20% with water
● (4 parts wax to 1 part water)
● Pass the leather through a heated tunnel
at 75 - 80O C.
● The leather is smooth-plated at 100O C and
100 T pressure.
Typical Properties:
- Appearance: Milky White
fluid
- Solids: 25% ( +/-1%)
- LBS/GAL: 8.3
- Flash Point: NA
- Viscosity: 150 cps
- pH: 8.5 - 9.5
|
| This information is believed to be accurate but
is not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
PW-5833 pull up compound is a propriety
blend of natural and synthetic waxes and
oils.
Characteristics:
- Primarily used
in producing "pull-up" leathers.
Recommended
Usage:
PW-5833 pull up
compound can be applied by roller coater,
curtain coater, or swabbing machine. PW-5833
pull up compound can be applied to crust
leather or grain or flesh, specific amount
applied will determine the extent of "pull-up".
Dilution is achieved with mineral spirits, (WILL
NOT MIX WITH WATER!)
|
Typical Properties:
- Appearance: Slightly amber
Liquid
- Solids: 100%
- LBS/GAL: 7.4
- Flash Point: NA
- Viscosity: >500 cps max
- pH: NA
|
| This information is
believed to be accurate but is not guaranteed
and we assume no legal responsibility for its
accuracy. Users should test the product to
determine its suitability for their particular
purpose. Nothing presented here is to be
construed or implied. |
|
|
| |
| |
Description:
SO-1400 oil is a high molecular weight
finishing oil.
Characteristics:
- When used as a
post treatment on waterproofed leather,
SO-1400 oil will not negatively impact
mazur flexes.
- Produces an
oily, "draggy", "greasy" feel when
required on Full Grain or Nu-Buck
leathers of conventional tannages.
|
Recommended
Usage:
SO-1400 oil is
applied by hot roller application (roll temp
30 - 35OC )
Typical Properties:
- Appearance: Clear Liquid
- Solids: 100% ( +/-1%)
- LBS/GAL: 7.4
- Flash Point: NA
- Viscosity: <250 cps max
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
SO-1525 Finish Oil is a blend of oils.
Characteristics:
-
Produces water
resistance when applied to regular
crust.
-
Maintain good
mazur flexes when applied as a post
treatment on water resistant leathers.
|
Recommended
Usage:
When used as a
post treatment for water resistant leather,
SO-1525 Finish Oil must be diluted with
mineral spirits (dilution rate usually 1 to
1), and applied with a roller coater at
approximately 20/25 grams / sq.ft.
When applying on regular crust, SO-1525
Finish Oil must be applied by heated roller
coater 50 - 55OC at 25/25 grams / sq.ft.
SO-1525 Finish Oil can also be applied to nu-buck
leather via spray or roller coater.
Typical Properties:
- Appearance: Brown Liquid
- Solids: 100% ( +/-1%)
- LBS/GAL: 8.25
- Flash Point: >200ºF
- Viscosity: 200 cps max
- pH: NA
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
SO-6601 oil compound is a high molecular
weight finishing oil.
Characteristics:
- SO-6601 is
used on water proof leathers as a post
treatment that will not negatively
impact mazur flexes.
- Can be used on
conventional tannages where an "oily", "draggy",
or "grabby" feel is required on full
grain or nu-buck leathers.
|
Recommended
Usage:
SO-6601 is applied
on a hot roller and can be blended with
mineral spirits as necessary to achieve
optimum viscotiy.
Typical Properties:
- Appearance: Clear Liquid
- Solids: 100% ( +/-1% )
- LBS/GAL: 7.4
- Flash Point: NA
- Viscosity: 200 cps max
- pH: NA
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
SW-200 Finishing wax is a blend of selected
oils and waxes
Characteristics:
- Produces water
resistance when applied to regular crust.
- Produces an
elegant waxy pull up
|
Recommended
Usage:
SW-200 must be
applied by heated roll coater 50-55*C
SW-200 can be mixed with SO-1525 to improve
mazers on regular crust and adjust the
desired pull up effect.
Typical Properties:
- Appearance: Slightly Tan
wax/paste
- Solids: 100% ( +/-1%)
- Melting Point: 50ºC
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
PU-1200 Wax is a blend of natural and
synthetic waxes.
Characteristics:
- Produces pull-up
effects on certain crusts.
- Produces a
waxy or greasy leather surface.
|
Recommended
Usage:
PU-1200 Wax must
be applied at 70O to 80O C. Can be applied
to side leather or splits. PU-1200 Wax can
be made softer with an addition of a small
amount of PU-1325 Wax.
Typical Properties:
- Appearance: Brown solid at
room temperature
- Solids: 100%
- Melting Point: 55ºC
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
PU-1325 Wax is a blend of natural and
synthetic waxes.
Characteristics:
- Produces pull-up
effects on certain crusts.
- Produces a
waxy or greasy leather surface.
|
Recommended
Usage:
PU-1325 Wax must
be applied at 70O to 80O C. Can be applied
to side
leather or splits. PU-1325 Wax can be made
harder with an addition of
an amount of PU-1200 Wax.
Typical Properties:
- Appearance: Brown solid at
room temperature
- Solids: 100%
- Melting Point: 55ºC
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
PU-W2506 is a water based compound of oils
and waxes.
Characteristics:
- Primarily used
in producing "pull-up" leathers.
- Produces a
rich, dark, even grain that enhances "pull-up".
|
Recommended
Usage:
PU-W2506 can be
applied by roller coater or by seasoning
machine.
Typical Properties:
- Appearance: Slightly amber
/ opaque liquid
- Solids: 48% ( +/-1%)
- LBS/GAL: 7.5
- Flash Point: NA
- Viscosity: 150 cps max
- pH: 8.3 - 9.3
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
| |
| |
Description:
PU-W3535 is a water based, active oil
compound.
Characteristics:
- Primarily used
in producing "pull-up" leathers.
- Produces a
rich, dark, even grain that enhances "pull-up".
- An oil of
choice when solvent use may be
problematic.
- PU-W3535 has
also been shown to promote adhesion of
subsequent finish oils.
|
Recommended
Usage:
PU-W3535 can be
applied by roller coater, flow coater, or by
seasoning machine.
Typical Properties:
- Appearance: Slightly amber
/ opaque liquid
- Solids: 65% ( +/-1%)
- LBS/GAL: 7.8
- Flash Point: NA
- Viscosity: 150 cps max
- pH: 8.3 - 9.3
|
| This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied. |
|
|
|
