LA-4080 Penetrator is an acqueous blend of
surfactants.
Characteristics:
When
incorporated in base coats, adhesion is
promoted.
When used as
an impregnation penetrator, it should be
blended with
water prior to
mixing with acrylics.
Recommended
Usage:
LA-4080 should be
blended with water prior to mixing with
binders. Generally, a dilution of 10-30% of
LA-4080 to formula, gives excellent results,
but it is recommended that testing be done
to reach optimum penetrant level required.
Typical Properties:
Appearance: Transparent
Liquid
Solids: 8% ( +/-0.5%)
LBS/GAL: 8.0
Flash Point: NA
Viscosity: 75 cps max
pH: 9.6 - 10.6
This information is believed to be accurate but
is not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
2.-LA-5904
Crosslinker
Click Here for more info
Description:
LA-5904 crosslinker is 100% active aziridine.
Characteristics:
Crosslinker
that is required to ensure proper
crosslinking of acrylics and urethanes.
Typical Properties:
Appearance: Clear
Solids: 100% ( +/-1%)
LBS/GAL: 9.4
Flash Point: >200O F
Viscosity: 2000 cps max
pH: NA
This information is believed to be accurate but
is not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
3.-LA-6121 Wax Emulsion
Click Here for more info
Description:
LA-6121 is a wax emulsion.
Characteristics:
Imparts a very
bright glazed looking surface on
leather after plating or fini-flex.
Tendency to
darken with heat and pressure during
plating.
Can be used to
enhance pull-up effects on finish
coats.
Recommended
Usage:
LA-6121 may be
blended with LBB-8930 to achieve pull-up
effects, typical formula being 20 - 30% of
LA-6121 to base coats binder content.
Typical Properties:
Appearance: Amber Liquid
Solids: 14% ( +/-0.5%)
LBS/GAL: 8.3
Flash Point: NA
Viscosity: 150 cps max
This information is believed to be accurate but
is not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
4.-LA-6312 ADDITIVE
Click Here for more info
Description:
LA-6312 Additive is a modified aqueous
acrylic emulsion.
Characteristics:
Imparts a waxy-grabby
feel when added to top coats.
Recommended
Usage:
2 % to 8% as
desired in final top coat.
Typical Properties:
Appearance: Slightly Tan
Liquid
Solids: 20.0% ( +/-1%)
LBS/GAL: 8.6
Flash Point: NA
Viscosity: 32 cps
pH: 9.3
This information is
believed to be accurate but is not guaranteed
and we assume no legal responsibility for its
accuracy. Users should test the product to
determine its suitability for their particular
purpose. Nothing presented here is to be
construed or implied.
5.-LA-6415
FEEL AGENT
Click Here for more info
Description:
LA-6415 is a proprietary blend of feel
enhanced agents.
Characteristics:
Produces a
soft and greasy feel to leather.
Can ONLY be
used in solvent systems.
Recommended
Usage:
LA 6415 is used by
adding directly to solvent tops. Though
amounts may vary depending on preference,
suggested use is 30-60 G/KG. LA-6415 can
also be blended with other solvent based
feel additives to produce a variety of very
popular feels.
Typical Properties:
Appearance: Brown Liquid
Solids: 50.0% (+/- 1%)
LBS/GAL: 8.5
Flash Point: 158ºF
Viscosity: >500 cps
pH: NA
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
6.-LA-7140
Wax Emulsion
Click Here for more info
Description:
LA-7140 is a wax emulsion for use as a soft
filler in base coats.
Characteristics:
Provides
excellent plate release in both base and
mid coats.
Tends to
improve wet rubs.
Helps maintain
natural look and feel to softer leathers.
Recommended
Usage:
LA-7140 may be
incorporated into base and intermediate
coats. Because it is a concentrated wax,
recommdnations for use is between 4 - 10% in
finish formulations.
Typical Properties:
Appearance: Slightly off
white liquid
Solids: 25.0% (+/- 1%)
LBS/GAL: 8.5
Flash Point: NA
Viscosity: 1000 cps max
pH: 9.0-10.0
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
7.-LA-7144
Colorless Pigment
Click Here for more info
Description:
LA-7144 is a high performance filler
Characteristics:
Provides fill
in base coats without causing a plugged
look.
Tends to dry
base coats providing better platability.
Can be used in
place of percentages of colored pigments
in base coats to produce a semi-analine
effect.
Recommended
Usage:
LA-7144 can be
used as desired to produce better fill or
finish effect within base coats. Percentage
of amounts vary as to desired effects. Typical Properties:
Appearance: Beige Liquid
Solids: 38% ( +/-1%)
LBS/GAL: 10.9
Flash Point: NA
Viscosity: 400 cps max
pH: 8.5 - 9.5
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
8.-LA-8345
Thickening Agent
Click Here for more info
Description:
LA-8345 is a high performance thickener for
aqueous base coats.
Characteristics:
Tends to
thicken the viscosity of base coats.
Recommended
Usage:
LT-8345 can be
added directly to base coats under agitation
of the mix. Suggested mixture is 0.5% to
1.5% of LA-8345 but may vary depending upon
application methods of the base coats.
Typical Properties:
Appearance: Slightly opaque
liquid
Solids: 40% (+/- 1%)
LBS/GAL: 9.5
Flash Point: NA
Viscosity: 5000 cps max
pH: 6.5 - 7.5
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
9.-LA-9590
Duller
Click Here for more info
Description:
LA-9590 Duller is a slightly resonated
duller for base coat systems.
Characteristics:
Excellent
dulling abilities for base coats.
By
incorporating LA-9590 duller in ones'
base coats, the transition to a final
dull top coat is less dramatic, leading
to less use of duller in the final top
and also most often better physicals.
Recommended
Usage:
2% to 10% in base
coats, generally less in first coat,
building up to the final base coat.
Typical Properties:
Appearance: Milky liquid
Solids: 12.5% ( +/-0.5%)
LBS/GAL: 8.9
Flash Point: NA
Viscosity: 30 cps
pH: 8.3
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
10.-LA-9735
Slip
Click Here for more info
Description:
LA-9735 is a water based silicone emulsion.
Characteristics:
Imparts a
smooth slippery feel.
Improves
abrasion resistance and tabers.
Improves
scotch tape release.
Recommended
Usage:
2% to 8% as
desired in final top coat.
Typical Properties:
Appearance: Milky liquid
Solids: 16% ( +/-0.5%)
LBS/GAL: 8.2
Flash Point: NA
Viscosity: 32 cps
pH: 8.1
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
11.-LA-9745
Slip
Click Here for more info
Description:
LA-9745 slip is a water based silicone
emulsion.
Characteristics:
Imparts a
smooth buttery feel.
Improves
abrasion resistance and tabers.
Improves
scotch tape release.
Recommended
Usage:
2% to 6% as
desired in final top coat.
Typical Properties:
Appearance: Milky Liquid
Solids: 26% ( +/-0.5% )
LBS/GAL: 8.2
Flash Point: NA
Viscosity: 32 cps
pH: 8.0
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
12.-LA-9785
Slip
Click Here for more info
Description:
LA-9785 is a water based silicone emulsion.
Characteristics:
Imparts a
smooth smooth feel.
Improves
abrasion resistance and tabers.
Improves
scotch tape release.
Recommended
Usage:
2% to 8% as
desired in final top coat.
Typical Properties:
Appearance: Milky Liquid
Solids: 16.5% ( +/-0.5%)
LBS/GAL: 8.2
Flash Point: NA
Viscosity: 32 cps
pH: 8.1
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
13.-LA-9825 Leveler
Click Here for more info
Description:
LA-9825 Leveler is a water-based leveling
agent for base coats.
Characteristics:
Reduces
streaking in seasoning applications.
Reduces fish
eyes in spray and roll coat applications.
Recommended
Usage:
2% to 5% in base
coats.
Typical Properties:
Appearance: Milky Liquid
Solids: 9.6% ( +/-0.5%)
LBS/GAL: 8.6
Flash Point: NA
Viscosity: 20 cps
pH: 4.5
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
14.-LA-Stucco-1200
Click Here for more info
Description:
LA-Stucco-1200 is a thermoplastic compact
acqueous polyurethane
emulsion.
Characteristics:
Excellent
filling.
Excellent
print retention.
Promotes
adhesion of base coat.
Very good
buffing and plating abilitilies.
Recommended
Usage:
LA-Stucco-1200 may
be applied by hand, airless spray, or
reverse roll
coater.
Typical Properties:
Appearance: White paste
Solids: 44 - 47%
LBS/GAL: 8.9
Flash Point: NA
Viscosity: >200 cps
pH: 8.0 - 9.5
This
information is believed to be accurate but is
not guaranteed and we assume no legal
responsibility for its accuracy. Users should
test the product to determine its suitability
for their particular purpose. Nothing presented
here is to be construed or implied.
