Industrial floors are always subjected to high wear, traffic of materials, men, vehicles or attack by spillage of various chemicals and oils or else impacts by loads falling on floor etc. owing to the nonstop use of floor in the operation plants, total shut down for floor maintenance is difficult, so it is essential to carry out the repairs by using special equipment of quick setting, non messy, high strength characteristics. The floor should be thoroughly abraded following chemical wash, wherever it is necessary, for exclusion of contamination of oil, dust, grease or loose particles etc.
The industrial floor, which has oil for many years need relaying of cementatious floor using polymer modified cement concrete, after removing top portion of the oil soaked floor. This is a main floor repair action requiring curing of the cementatious floor thus involving less time and wet floor conditions that requires a longer shut down. These are highly built, chemical & abrasion fighting floors finishes that are effortless to clean, non-porous and jointless. This industrial floor coating can be textured in damp areas for slip resistance. The coated floors are pleasing, thus creating different culture of cleanliness and industrial hygiene.