Wednesday, February 17, 2010
A good garage floor system will be made up of a basic coverage, a base coat and a top coat. A basic coverage coat is essential to make sure a good quality bond. Apply the basic coverage with a roller as instructed by the manufacturer's directions and let it to dry out.
When the surface is dried up to the touch, you can apply the epoxy or urethane base coat. Put out the color flakes uniformly into the wet base. The flakes are applied lightly to give you an idea about the base color or to a great deal for increased coverage and toughness. Blow or sweep up slack flakes.
Scratch the floor by means of a metal floor scraper to make sure no paint chips are stuck up then blow the floor for a second time. After that seal up is done you can apply the last coat. Let the floor to dry up for an at least 48 hours before allowing foot passageway and up to five days for automobile traffic. Two sealer coats possibly will be required if a full broadcast is applied.
Labels: Garage-Floor-Coatings
Sunday, February 14, 2010
You can also turn your garage into an additional room of your living area with the application of a garage floor coating. There are a lot of resources and sites available to guide you on more about the designing ideas for your garage floor and as well how garage floor systems are set up, and maintained your garage floor system in a proper and a systematic way.
Labels: Garage Floor Coatings

