Home American Speciality Coatings Gallery Kryptonite Xtreme Trailer Coatings Kryptonite Concrete Densifiers and Sealers Xtreme Leather Coatings Houston Swimming Pool Coatings Texas Garage Floor Coatings Houston Tx Metal Coatings Ultimate Garage Floor Coatings Garage Solutions About American speciality Coatings Documentation and Logistics Services Weblog Referrals Contact Us

Floor Coating home >> Coating articles >> American Specialty Coatings

American Specialty Coatings

Tuesday, April 6, 2010

Find the various types of garage flooring

Most of the times you find garage floors are uninteresting but you can make them attractive by utilizing floor coatings. Garage floor coatings are available in various types such as epoxy, polyurethane and latex.

Epoxy coatings

Epoxy paint blends well with the concrete and the consequences of this, it will be solid and strong surface that opposes stains. You should clean the garage floor previous to apply epoxy paint on that floor. You make sure that garage floor should be free of any dust or dirt.

Polyurethane coating

Polyurethane coating is another type of garage floor coatings that does not become yellow. The finishing effect of polyurethane coating is long-lasting and has a very high shiny surface. You need to apply you need to apply a basic layer of an epoxy to the garage floor previous to applying polyurethane floor coat.

Latex coating

Latex paint for garage floor is also one more type of garage floor coating. Latex garage floor paint is the cheapest alternative available in market when compare with the epoxy and polyurethane. Latex garage paint needs a minimum of 72 hours for drying previous to park your motor vehicle. Latex floor paint provides an antique appearance and can look like brickwork or even similar to leather.


Wednesday, February 17, 2010

Garage floor coatings: Tips for Designing

Garage floor coatings can be set up over the most concrete garage floors, provided that they are aptly prepared.

A good garage floor system will be made up of a basic coverage, a base coat and a top coat. A basic coverage coat is essential to make sure a good quality bond. Apply the basic coverage with a roller as instructed by the manufacturer's directions and let it to dry out.

When the surface is dried up to the touch, you can apply the epoxy or urethane base coat. Put out the color flakes uniformly into the wet base. The flakes are applied lightly to give you an idea about the base color or to a great deal for increased coverage and toughness. Blow or sweep up slack flakes.

Scratch the floor by means of a metal floor scraper to make sure no paint chips are stuck up then blow the floor for a second time. After that seal up is done you can apply the last coat. Let the floor to dry up for an at least 48 hours before allowing foot passageway and up to five days for automobile traffic. Two sealer coats possibly will be required if a full broadcast is applied.





Home | Kryptonite Concrete Densifiers and Sealers | Kryptonite Xtreme Trailer Coatings | Photo Gallery | Xtreme Leather Coatings | Metal Coatings | Xtreme Swimming Pool Coatings

 Xtreme Garage Floor Coatings | The Ultimate Garage Floor | Garage Solutions | Documentation and Logistics Services | Houston Coating Articles | About Our Business | Weblog | Referrals

Copyright (c) 2007 - asc-tx.com - Web Design by WebZoneUS